This set of four 19″ BBS wheels measure 8″ and 10.5″ in width front and rear respectively and were removed from a Ferrari F430 Challenge race car. They were manufactured in Germany and wear an older set of Pirelli tires for storage purposes. Ferrari casting marks, offsets, and wheel sizes are displayed below. These center-lock Challenge wheels have been with the selling dealer for about a year and are now being offered at no reserve out of Carrollton, Texas. The wheels have reportedly been refinished recently, though wear and marks can be seen, particularly on the rear outer edges. The front of each individual wheel can be seen in the gallery below. The wheels are secured by a single center lug nut, but no hardware is included. The seller states that the wheels were removed from an F430 model but will also fit a 360 Challenge. Individual casting marks show the wheel widths as 8″ for the fronts and 10.5″ for the rears, while both are 19″ in diameter. Other casting marks show BBS production in Germany, Ferrari lettering, and offsets of ET 33 up front and ET 40.5 out back. Older Pirelli Rosso tires are equipped with a reported 70% tread remained, though the rubber is partially dry-rotted. The seller can help coordinate shipping from Carrollton, Texas.
↧