These 18″ Ferrari wheels measure 7.5″ and 10″ in width and were made by Speedline in Italy for the F355 model. Stampings show part numbers and 1998 production for Ferrari, as well as sizing and offsets. This set of four wheels has been with the seller for two years, and yellow center caps with prancing horses are included. The seller is willing to help coordinate shipping, and the wheels should also fit Ferrari 348 models. They are now being offered at no reserve out of Monterey, California. The wheels are finished in silver and are all equipped with valve stems and center caps. Some marks and chips are indicated by the seller in the gallery below. These wheels have a bolt pattern of 5×4.25″ and will also fit the earlier Ferrari 348 model. Casting marks on the inside of the five spokes show May 1998 production by Speedline in Italy. Wheel dimensions are shown as 18×7.5″ for the fronts and 18×10″ for the rears, with corresponding offsets of 46.15 and -77.9. Part numbers 166475 correspond to the front wheels, while the rears show part numbers 166476.
↧