This set of 19″ Ferrari 575 wheels are two-piece factory items made by BBS. Measuring 8.5″ and 10.5″, these wheels have been with the seller for four years and were previously installed on a 550 Maranello for about 500 miles. This Modular set was standard equipment on the limited-production 575 Superamerica, and several other compatible fits are listed below. The seller has provided photos of the part numbers, offsets, rim finishes, and more. This set of wheels is located in Peapack, New Jersey with the seller, who can assist with shipping via UPS. All four wheels feature two-piece construction and come with center caps and Michelin tires installed. Each wheel front is shown in the gallery, and the 5×108 bolt pattern will fit 456/550/575/Superamerica/Barchetta models, allowing for the offsets described below. These wheels measure 19″ in diameter, with widths of 8.5″ for the front and 10.5″ for the rear as shown above. The casting marks also indicate magnesium/aluminum alloy construction, while the offsets are given as -32mm for the rear wheels and -43.6mm for the fronts. Casting marks show the Ferrari etching plus part numbers 188475/188476 for the front/rear pairs. Fabrication by BBS in Germany is shown above.
↧